Product functions：
It mainly produces products with etpu as the main material, andproduces high-quality products through a series of processesincluding feeding, heating, cooling and demoulding.
Product advantages：
Negative integrated formingIntegrated molding of side wall laminationCarbon fiber sheet integrated forming technology can be usedVacuum suction is adopted to prevent the negative from falling offnaturally
This machine is equipped with three air chambers (moving mold, fixedmold and side wall)When the machine is formed, it is synchronized with the placement ofnegatives, side wall films or other inlays, which does not affect theplacement time and has higher efficiency, All the above functions arecompleted on the workbench without workers' access (extremely safe)
| Project | Unit | ETPU-CY816A | ||
| External dimensions | mm | 5200*6900*3850 | ||
| Weight | ton | 22 | ||
| Opening and closing stroke | Maximum interval | mm | 1000 | |
| Minimum interval | mm | 0 | ||
| Guide rod | Number | a | 4 | |
| Diameter | mm | 100 | ||
| Hydraulic system | Drive the hydraulic cylinder | a | 6 | |
| Clamping mold hydraulic cylinder | a | - | ||
| Drive cylinder diameter | DN | 100 | ||
| Lock mold cylinder diameter | DN | - | ||
| Clamping force | N | - | ||
| Motor | KW | 15伺服 | ||
| Steam system | Inlet diameter | DN | 80 | |
| Main valve diameter | DN | 65 | ||
| Auxiliary valve diameter | DN | / | ||
| Pressure | mpa | 6 | ||
| Cooling system | Inlet diameter | DN | 65 | |
| Valve diameter | DN | 65 | ||
| Mold inlet diameter | DN | 20 | ||
| Temperature | ℃ | 45-50 | ||
| Air system | High voltage | Inlet diameter | DN | - |
| Valve diameter | DN | - | ||
| Pressure | mpa | / | ||
| Low voltage | Inlet diameter | DN | 65 | |
| Valve diameter | DN | 65 | ||
| Pressure | mpa | 4 | ||
| Feeding system | Material extraction fan | a | 2 | |
| Capacity of material tank | L | 85*1 55*2 | ||
| Material tank | a | 3 | ||
| Drainage system | Pipe diameter | DN | 150 | |
| Valve diameter | DN | 150 | ||
MOBILE
HOME
