Product functions：
It mainly produces products with etpu as the main material, andproduces high-quality products through a series of processesincluding feeding, heating, cooling and demoulding.
Product functions：
It has twelve mold holes and can install twelve moldsUniversal frame is adopted, which is applicable to a variety of moldsizes on the market.
The special heating structure makes the temperature difference insidethe mold controlled at about 1 C,The sealing structure not available in the market is adopted, so that thesteam will not leak out, which is energy-saving and efficient.The complete machine frame is firm and made of Q345 steel, which isdurable and not easy to corrode.Imported valves and accessories are adopted, which is more stableand efficient.
| Project | Unit | LWS616 | ||
| External dimensions | mm | 5400*3180*3900 | ||
| Weight | ton | 10 | ||
| Opening and closing stroke | Maximum interval | mm | 900 | |
| Minimum interval | mm | 0 | ||
| Guide rod | Number | a | 4 | |
| Diameter | mm | 80 | ||
| Hydraulic system | Drive the hydraulic cylinder | a | 2 | |
| Clamping mold hydraulic cylinder | a | / | ||
| Drive cylinder diameter | DN | 150 | ||
| Lock mold cylinder diameter | DN | - | ||
| Clamping force | N | - | ||
| Motor | KW | 15 | ||
| Steam system | Inlet diameter | DN | 80 | |
| Main valve diameter | DN | 65 | ||
| Auxiliary valve diameter | DN | - | ||
| Pressure | mpa | 6 | ||
| Cooling system | Inlet diameter | DN | 65 | |
| Valve diameter | DN | 65 | ||
| Mold inlet diameter | DN | 20 | ||
| Temperature | ℃ | 45-50 | ||
| Air system | High voltage | Inlet diameter | DN | |
| Valve diameter | DN | - | ||
| Pressure | mpa | - | ||
| Low voltage | Inlet diameter | DN | 65 | |
| Valve diameter | DN | 65 | ||
| Pressure | mpa | 4 | ||
| Feeding system | Material extraction fan | a | 1 | |
| Capacity of material tank | L | 55*2 | ||
| Material tank | a | 2 | ||
| Drainage system | Pipe diameter | DN | 150 | |
| Valve diameter | DN | 150 | ||
MOBILE
HOME
